FLANCCI LED Light Blocking Stickers Review (2025): Blackout LED Covers That Dim 50–80% for Better Sleep and Cleaner Workspaces

If indicator LEDs are keeping you up at night—or just making your office or living room look like a mini server room—dedicated dimming stickers are a simple, tidy fix. The FLANCCI LED Light Blocking Stickers pack gives you two sheets (one pre-cut and one uncut) so you can mute bright device lights without messy tape or permanent modifications. Each sticker reduces brightness by roughly 50%, and stacking two or three can dim LEDs by up to about 80%+, striking a balance between visibility and comfort.

See current pricing: FLANCCI LED Light Blocking Stickers

What’s in the Pack

• Two sheets total:
  • 1 pre-cut sheet with assorted shapes and sizes (as pictured)
  • 1 uncut sheet you can trim to any shape
• Adhesive stickers designed specifically to reduce LED brightness on electronics (alarm clocks, routers, controllers, chargers, monitors, set-top boxes, etc.)

Shop the set here: blackout LED covers for electronics.

Key Features and Why They Matter

• Dims 50% per layer: One sticker softens harsh LEDs without fully hiding status info; stack two to three for darker rooms or bedrooms.
• Pre-cut + uncut versatility: Quickly cover common LED sizes or custom-cut a precise shape for odd placements.
• Strong, reliable adhesion: Stays put on most smooth surfaces until you intentionally remove it.
• Easy to apply: Peel, stick, done. No residues from liquid markers, no fraying edges like cloth tape.
• Works on almost any device light: Routers, modems, game consoles, PC cases, smart speakers (indicator only), alarm clocks, USB chargers, power strips.

Explore more: LED light dimming stickers (2-sheet pack).

Setup: From Peel to Perfect

• Clean the surface: Wipe dust/oil from around the LED with a dry microfiber or a bit of isopropyl alcohol; let dry.
• Choose your piece:
  • Pre-cut shapes for common LEDs.
  • Trim the uncut sheet with scissors or a craft knife for precision.
• Apply gently: Align over the LED and smooth from center outward to avoid bubbles.
• Adjust brightness by layering: Each layer reduces light further (roughly 50% per sticker). Stack 2–3 for bedrooms or ultra-bright indicators.

Pro tip: If you’re unsure how dark you want it, start with the smallest sticker or trim a thin strip, then layer as needed.

Performance: Bedroom Calm, Status Still Visible

• In living spaces: One layer usually takes the “sting” out of LEDs on routers, soundbars, and set-top boxes while keeping status visible.
• In bedrooms and nurseries: Two layers reduce glow enough for darker rooms and better sleep hygiene without resorting to thick tape.
• In offices/home theaters: A neat, matte look beats the DIY vibe of electrical or painter’s tape and avoids adhesive gunk.

Note: Ultra-bright or multi-color RGB indicators may require a slightly larger piece or an extra layer to evenly diffuse light.

Design Notes and Build

• Matte finish to cut glare and bloom around the LED
• Thin profile hugs the surface so it doesn’t catch on sleeves or cleaning cloths
• Firm adhesive that resists peeling at corners on smooth plastics and metals

Caution with delicate finishes: On specialty coatings (e.g., soft-touch plastics) always test a small area first.

Where They Shine (Use Cases)

• Bedroom tech: Alarm clocks, chargers, humidifiers, air purifiers
• Network gear: Routers, modems, mesh nodes—especially those with multiple bright status lights
• Entertainment centers: Consoles, streaming boxes, receivers, TVs with persistent standby LEDs
• Office setups: Monitors, docking stations, webcams, PC cases, USB hubs

Browse now: LED blackout stickers for electronics and routers.

What to Avoid

• Don’t cover sensors or microphones: Avoid IR receivers (for remote controls), ambient light sensors, or mic holes.
• Don’t block ventilation: Keep stickers away from vents and heat exhausts.
• Not for safety-critical indicators: Leave visible lights on smoke/CO detectors, medical devices, or essential alarms.

Compared to DIY Alternatives

Option	Look	Brightness Control	Residue Risk	Reversible
FLANCCI dimming stickers	Clean, matte, low-profile	Layerable (50–80%+)	Low with careful removal	Yes
Electrical tape	Bulky, glossy	Opaque (too dark)	High (sticky residue)	Yes, but messy
Painter’s/washi tape	DIY look	Mild dimming	Low	Yes, but peels easily
Permanent marker/nail polish	Messy/permanent	Variable, blotchy	N/A (permanent)	No
Black vinyl dots	Clean look	Opaque (no status light)	Medium	Yes

The FLANCCI stickers sit in the sweet spot: neat finish, adjustable dimming, easy removal.

Tips for Best Results

• Test first: Apply a small piece to judge dimming level before committing to a bigger cutout.
• Layer evenly: If stacking, cover the LED fully with each layer to avoid haloing.
• For multi-LED arrays: Use the uncut sheet to make a single tidy strip for a uniform look.
• Removal: Warm gently (hair dryer on low) and peel slowly at a shallow angle to minimize adhesive residue.

Pros and Cons

Pros	Cons
Adjustable dimming (≈50% per layer, 80%+ with stacking)	May need multiple layers for ultra-bright or colored LEDs
2 sheets: 1 pre-cut + 1 uncut for custom shapes	Adhesion can vary on textured/soft-touch surfaces
Clean, matte finish that looks intentional	Not intended for critical safety device indicators
Strong adhesive stays put until removed	Can obstruct sensors if placed carelessly
Works on a wide range of devices	Not rated for high heat or outdoor exposure

FAQs

• Will one sticker completely block the light?
  No—one layer dims about 50%. Add 2–3 layers for a much darker result.
• Do they leave residue?
  Typically minimal on smooth plastics/metals when removed carefully. Test first on delicate coatings and warm the adhesive before peeling.
• Can I move and reuse them?
  They’re designed as stickers; repositioning reduces adhesion. Plan your placement, then press firmly.
• Will they interfere with my remote?
  If you cover the IR sensor, yes. Place the sticker only on indicator LEDs, not over IR receivers or ambient light sensors.
• Are they safe on screens?
  Place along bezels or indicator areas, not on display panels themselves.

Ready to calm those blinding LEDs? Check out the FLANCCI blackout LED covers (2-sheet pack).

Final Verdict

FLANCCI’s LED Light Blocking Stickers are a small, inexpensive upgrade that make a big difference in sleep spaces and clean-looking setups. The combo of pre-cut convenience and a DIY uncut sheet, plus layerable dimming from 50% to roughly 80%+, gives you precise control over brightness without the mess of tape or permanent fixes. If you’re done with midnight glow and blinking distractions, this pack is an easy yes.

See today’s price or purchase the LED light dimming stickers by FLANCCI.

Affiliate Disclosure: As an Amazon Associate, I earn from qualifying purchases. This means if you click on a link and buy something, I may earn a commission at no additional cost to you.